North America's Leading Siemens PLM Partner

Designfusion Blog

FAQ- How to view a STL file in Viewer

Doug Golomb - Thursday, March 26, 2015

Introduction:


•  This FAQ will instruct you on how to view a STL file in the “Viewer” tab.

Requirements:

•  Important!!! You must login to Teamcenter as “infodba” to complete this task.

Step By Step Process… 

1.Login to Teamcenter as “Infodba
2.Select Edit> Options>
3.Select “Search” and input “seco” into the search field
4.Select “SecondaryVMUDatasets” and Add> “STL”



5.Select “Search” and input “VMU” into the search field
6.Select “VMU_FileSearchOrder” and Add> “STL”



7.Select “Search” and input “def” into the search field
8.Select “defaultViewerConfig.VIEWERCONFIG
9.Add> “STL.DirectModelViewer=STL,STL-bin” to the “Current Values”



10.Select “g4mViewerConfig.VIEWERCONFIG”
11.Add> “STL.DirectModelViewer=STL,STL-bin” to the “Current Values”



12.Login as an end user
13.Copy a STL file into an “Item Revision”
14.Select the “Viewer” tab; result…


Join us at the annual New York State Regional Users Group meeting

John Pearson - Wednesday, September 24, 2014

Designfusion is proud to be a sponsor and major contributor to this year’s New York State RUG meeting. This year’s meeting will be held at the RIT Inn & Conference Center in Rochester NY, on October 7, 2014. All users are invited, even those who live outside of New York State. Designfusion will be presenting at 8 of the 35 planned seminars.  Our focus this year is Solid Edge and Teamcenter Administration, however there are plenty of other presentations for all attending, as you can see from the agenda below.

 

 

 

Not only is this a great learning opportunity, but it’s also a chance to meet and network with other users and some of the people who support your Siemens’ PLM software.


There is a small fee to attend this event, and you must register in advance. You can do this online at http://www.plmworld.org/new_yorkrugevent.  This site will provide you with all the details of the conference and directions to RIT Inn &

Conference Center. We hope to see you there, and don’t forget to drop by the Designfusion booth in the sponsor’s area.