CAMWorks for Solid Edge is an embedded CAM program that is fully integrated with Solid Edge. The only feature-based CAM product on the market that leverages synchronous technology.
CAMWorks drastically reduces programming time using automatic feature recognition in combination with knowledge base. CAMWorks shortens machining times with ultra high-performance toolpaths. Parts that used to take hours to program can be programmed in minutes or even seconds. Dramatically increase your efficiency and capacity reducing overall lead time.
CAMWorks will lower the cost of ownership with ease-of-use and a short learning curve. While reducing turnaround with automatic generation of toolpath for rapid manufacturing design.
Associative machining insures the part machined is the same revision as the model.
CAMWorks for Solid Edge is an embedded CAM program that is fully integrated within Solid Edge.
By integrating with Solid Edge you can program faster by having a more intuitive feedback loop.
2.5 Axis Milling
Drilling - addresses drilling, reaming, boring, tapping, peck drilling, and custom cycles. Automated hole making is available with the feature based machining options.
3 - Axis Milling
3-Axis milling – for roughing, rest milling, semi-finishing, and finishing of contoured surfaces, with a complete set of milling strategies to address the challenges of complex geometry. This capability includes additional functions needed for high-speed machining.
Synchronization – a graphical means of displaying an unlimited number of channels, with scrolling code in a choice of formats, time displays and with functions to add wait and sync codes. The Synchronization Manager is directly linked to the internal postprocessor and runs from posted output for the greatest accuracy.
Turning – a complete solution that is easy enough to use on simple programs and capable enough to tackle your toughest geometry in multi-spindle, multi-turret applications. The system can work with solids or wireframe or even 2D profiles.
Wire EDM – a complete solution for programming 2 4-Axis wire EDM machines. A range of wire operations is available, including multi-pass profiling, wire reversing and area removal.
2 1/2-Axis roughing patterns can be applied based on basic boundary data or solid geometry. Zig-zag, offset, and plunge milling are examples of the toolpaths provided. High speed roughing tool paths such as trochoidal are available here. Feature based machining functions automate the identification and programming of slots and faces.
Designfusion sells and support CAMworks all across Canada and the United States. If you are looking for pricing information, a demo, or have additional questions just fill out the form to the right and well will be in touch right away.
WHO WE ARE:
Designfusion is the largest dedicated solution provider of Siemens PLM software in North America. With an expert support team and a decade of history in the industry designfusion is the #1 choice for companies looking to best enhance their software acquisition.
Keep in touch on Google+ :
305 Milner Ave, Suite 308
Toronto, Ontario, M1B 3V4
Toll Free: 1-888-567-3933
1400 E Touhy Ave, Suite 477
Des Plaines, IL 60018
Toll Free: 1-866-921-1830
3477 Corporate Parkway, Suite 104 Center Valley, PA 18034 USA
Toll Free: 1-866-921-1830
2734, rue Étienne Lenoir
Laval, Quebec. H7R 0A3. Canada.
871, rue Shefford, suite 201, Bromont, Quebec, J2L 1C4. Canada
Toll Free: 1-866-534-5682
Designfusion proudly supports all of North America in both English and French.
Note: The technical support hotline is for maintenance paying customers only.
5940 MacLeod Trail, Suite 500. Calgary, Alberta,
T2H 2G4. Canada
2809 Wehrle Drive,
Williamsville, NY 14221
2828 Boulevard Laurier, Suite 782, Québec, QC, G1V 0B9, Canada.
Quebec City, QC